02890 370 416
02890 779 823
sales@djkilpatrick.co.uk
 
Picture of Australian Monitor Amis60 Amplifier

Australian Monitor Amis60 Amplifier

The AMIS60 is a 4 channel, 60 watt mixer amplifier suitable for rack or desk mounting.

Full Description

PRODUCT DESCRIPTION:

The AMIS60 is a 4 channel, 60 watt mixer amplifier suitable for rack or desk mounting. The amplifier is a self contained compact unit of solid steel construction. Inputs The AMIS60 has four universal input channels with separate level controls. Each channel will accept balanced or unbalanced microphone, line and auxiliary inputs. The unit has industry standard XLR microphone sockets and dual RCA auxiliary sockets for each channel. An electronically-balanced 600 ohm telephone input for paging is also provided. An insert point is also featured on the rear panel for those applications where an additional EQ or feedback exterminator may be required. Outputs The AMIS60 features 70 volt and 8 ohm isolated transformer outputs, plus a tape recorder output by means of dual RCA sockets. A balanced 700mV XLR output is also provided to feed up to 6 power amplifiers. A vox triggered relay output is also available on the rear panel for activation of external devices from the vox muting circuit. In most cases this would be used as a muting bypass relay, which when used with the appropriate external attenuator will maintain paging levels irrespective of the attenuator setting.
 
TECHNICAL SPECIFICATIONS:

Power Output 60 Watts RMS Maximum Load 80 Ohms @ 70 Volts Power Bandwidth 60Hz - 17kHz (- 3dB) Frequency Response 60Hz - 23kHz (- 3dB) Total Harmonic Distortion 0.5% @ 1 KHz rated power Signal To Noise Ratio -74dB with all controls at their centre position Tone Controls Bass @ 100Hz: Boost +12dB Cut -12dB; Treble @ 10kHz: Boost +9dB Cut -9dB Inputs Four mic/aux universal inputs with XLR female mic sockets and dual RCA aux sockets; 600 ohm transformer balanced telephone paging input Input Sensitivity Mic: 1mV @ 200 Ohms; Aux: 150mV @ 47K Ohms Outputs Speaker: 70 Volts, 8 Ohms; Tape: 350mV @ 10K Ohms; Line: Balanced 700mV Phantom Power 18 Volts DC on all Mic inputs (rear panel on/off switch)
 
WEIGHT (KG) Unless stated otherwise:

22LBs
 
DIMENSIONS (W x H x D) (MM) Unless stated otherwise:

3.5